FAQ
What to do with the error Poor Positioning Status?
Possible reasons: Luba can not get enough good signal at the current position RTK reference station can not get enough good signal at the current position What to do: Check if the RTK reference station is installed in an open-sky view position, and ...
When will Bluetooth and WiFi connection be needed and how to use them
Scenarios that need both Bluetooth and Wi-Fi connections. Initial setup for Luba Submit a Log-feedback from the App Update firmware Scenarios that need Bluetooth connection, WiFi connection is not necessary Create/Edit the boundary of the map Create ...
How to factory reset Luba
When should I try this factory reset? You can turn on Luba, but can not connect it to theApp via the Bluetooth or WiFi connections Note: Doing the factory reset would erase the map and you'll need to create the map again. Please kindly send us a ...
What is the best installation place for RTK Reference Station?
The distance between RTK Reference Station to the walls, roof, or trees should be ideally distanced by 45° from RTK Base to the height of walls, roof, or trees as shown below. Or install the RTK Reference station on the wall or roof with an open sky ...
What is the working condition for Luba?
Luba needs continuous signals from both the RTK reference station and the satellites during the job. It needs a 90° open-sky view at least to get enough signal to work. It does not always need a line-of-sight view from each point of your lawn to the ...