When will Bluetooth and WiFi connection be needed and how to use them

When will Bluetooth and WiFi connection be needed and how to use them

Scenarios that need both Bluetooth and Wi-Fi connections.
  • Initial setup for Luba
  • Submit a Log-feedback from the App
  • Update firmware
Scenarios that need Bluetooth connection, WiFi connection is not necessary
  • Create/Edit the boundary of the map
  • Create No-go zone
  • Create Channel
  • Control Luba to move manually
What you can do with the WiFi connection
  • Monitor Luba's status remotely
  • Start/Pause/End a mowing job
  • Set Luba to recharge
  • Modify Luba's settings on App

    • Related Articles

    • What to do if the App could not connect to Luba via the Bluetooth connection?

      The problem could be the Luba or the App when you encounter such an issue. Please try the following steps first. 1. Power off Luba, unplug the Key and plug it back in, then power on Luba. 2. Restart the App and try again. Please refer to the ...

    • What should I do if Luba dose not connect to the WiFi connection?

      Luba only supports the 2.4GHz WiFi connection. Please check if the connection is in 2.4GHz or if it provides both the 2.4GHz and 5GHz connections. You may control Luba to move to near the router for firmware-updating purposes. Such an issue may also ...

    • How to factory reset Luba

      When should I try this factory reset? You can turn on Luba, but can not connect it to theApp via the Bluetooth or WiFi connections Note: Doing the factory reset would erase the map and you'll need to create the map again. Please kindly send us a ...

    • LUBA winter maintenance

      To make sure your Luba will be in perfect condition for the next mowing season, please follow these instructions. Preparation before winter storage Turn off all task schedules in Mammotion App. Charge the battery power of Luba to 40%-70%. Remove the ...